Livestock Farming
Biosecurity and sanitary mastery protocols for all types of livestock: technical cleaning, water treatment, and environment control.
What threatens your operation
Persistent biofilm on porous surfaces
Concrete walls, cemented floors, and metal equipment develop a bacterial biofilm between each rearing cycle. This film protects pathogens against standard disinfectants.
Contamination of drinking water circuits
Pipes accumulate scale, organic deposits, and biofilm, creating a reservoir of fecal coliforms, E. coli, and Salmonella that contaminates every batch of water distributed.
Aerial microbial pressure and ammonia
Ammonia released by litter attacks the respiratory mucous membranes of poultry. Beyond 25 ppm, performance drops and respiratory pathologies multiply.
What it really costs you
Increased mortality
Up to +8% mortality per batch on surfaces not deeply treated.
Degraded feed conversion ratio
A contaminated water network increases the FCR by 10 to 15%, meaning thousands of dinars lost per cycle.
Decreased zootechnical performance
Ammonia reduces the ADG by 12% and increases respiratory pathologies.
Recommended minimal protocol
The basic sequence for compliant sanitary mastery. Applicable to any operation in this sector.
CLORAGRO
Destruction of the organic biofilm on all building surfaces. Foam application, contact time 20 min.
HP Rinsing
Mechanical elimination of residues and detergent. Visually clean surface is mandatory.
OPTIMAGRO
Full spectrum terminal disinfection. Bactericidal, virucidal, fungicidal. Persistence of 7 days.
When to reinforce the protocol
In addition to the base protocol, these actions target the specific risk zones of your sector.
BIONET
Stripping of organic deposits and scale in water circuits before placing the animals.
AQUACONTROL
Bacteriological stabilization of drinking water throughout the rearing cycle.
AIRSAN
Fine nebulization in the presence of animals to reduce the aerial microbial charge and ammonia.
Particular situations
New batch after Salmonella contamination
In case of Salmonella detection on the previous batch, the protocol is reinforced.
Double passage of CLORAGRO + OPTIMAGRO, increasing concentrations by 30%. Microbiological control analysis before placement.
Rearing in hot climates (>35°C)
High temperatures accelerate bacterial proliferation and water degradation.
AQUACONTROL at a reinforced dosage + daily AIRSAN. Monitoring of pH and residual chlorine.
Planned biosecurity audit
Preparation for sanitary compliance audits.
Complete minimal protocol + pre-audit surface sampling with analysis in the N2K laboratory.
What you can expect
Reduction of mortality by 3 to 5 points per batch
Improvement of FCR by 5 to 10%
Reduction of ammonia below the 20 ppm threshold
Microbiological compliance of surfaces < 10 CFU/cm²
Drinking water compliant with regulatory thresholds
Request a customized protocol
Our experts analyze your specific situation and design a protocol adapted to your field constraints, your budget, and your sanitary goals.